Right Shower Lighting Ideas To Pick

Right Shower Lighting Ideas To Pick
Right Shower Lighting Ideas To Pick | image source: Zac Gudakov / Unsplash

Showers frequently have little lighting. Normal bathroom lighting is typically sufficient for most shower requirements, but certain wet-rated shower lights may significantly brighten the shower and enable you to see precisely what you’re doing, whether you’re shaving, cleaning, or applying soap.
Additionally, there are a few ways to intensify the bathroom’s overall illumination so that it shines into the shower enclosure.

Good Shower Lighting Qualities

Located in Shower: The greatest shower illumination can be found inside the shower enclosure. While general room lighting is a welcome addition, not all of the shower enclosure can be illuminated by it.

On the Ceiling: The ceiling of the shower enclosure is where the majority of shower lights are positioned. This shields the majority of the water from the light. Additionally, it is simpler to connect to the ceiling for power than the shower surround.

Wet-Rated Fixtures: A shower enclosure’s lighting fixtures must be damp- or wet-rated. According to NEC 2020 410.10 (D) of the National Electrical Code, lights installed inside showers up to a height of eight vertical feet must be designated as suitable for damp places or suitable for wet settings.

Properly Located: Because shower enclosures are typically small, the center is usually the best place to stand. However, you might want two or three lights in the enclosure for larger showers.

Kinds of Shower Lights

Fixed Wet-Rated Recessed Shower Light

Many showers have sealed recessed lights as a standard feature that bring dependable, safe lighting to this dim space. The junction box and light housing, which are coupled, fit into the plenum in the ceiling. Everything is made impermeable with a particular trim package.
Recessed lights that are wet-rated are reasonably priced, easy to install, and offer a wide range of style and size options. The units don’t always meet insulation-contact ratings, and they do take up a lot of space in the ceiling plenum. The space above ceiling drywall and below the floor above is known as Plenum

Low-Profile Wet-Rated Recessed Shower Light

More recent than the conventional, deep ceiling recessed lights are thin, low-profile recessed shower lights, also known as can-less shower lights.
With a thickness of less than 1/4 inch, can less shower lights hug the ceiling. In order to allow for insulation contact, the top portion of the light does extend into the ceiling plenum, but typically at a distance of less than 1/2 inch.

Since they lack a proper housing and the junction boxes are freely placed on top of the ceiling drywall, low-profile wet-rated shower lights make it simple to group multiple lights in a small ceiling.
But LEDs are always used in low-profile shower lights. Even while LED lights use less energy than halogen or incandescent bulbs, not everyone prefers the cold white light. The light hue of many can-less LED fixtures can be changed to be more like to incandescent or halogen lights, though, using adjustable switches.

Low-profile lights can be mounted on a wall dimmer switch to moderate the LED bulb’s brightness.

Gimbal Wet-Rated Recessed Shower Light

A gimbal lamp may tilt up and down between 0 and 35-40 degrees and rotate 360 degrees. The bulb is no longer protected by a watertight lens in recessed shower lights that are wet rated. The complete light unit is waterproof instead.
Shower lights with gimbals allow the user to virtually turn the light in any direction. Even better, you can direct the light toward the shower wall to create a delicate wash-wall glow. They come in especially handy if the shower ceiling is sloped.

However, gimbal shower lights can cost up to three times as much as fixed lights. Gimbal units can also lose some of their light when fully tilted.

Wet-Rated Ceiling Surface-Mount Shower Light

Because most shower ceilings are low, a recess is typically preferred for shower lights. However, if the ceiling is high enough to support the additional protrusion, some users might prefer surface-mount shower lighting.
Shower lights that are surface-mounted illuminate the entire shower rather than just a portion of it. However, the options are limited. The only available styles are plain, white, either circle- or square-shaped units.

Point: A surface-mount shower light is partially fixed to the surface. It necessitates the placement of an electrical box inside the ceiling plenum.

Steps To Increase Light in a Shower

Another alternative to adding a light to the shower is to make your bathroom’s general lighting more powerful. Even if a wet-rated shower light is installed, you might still want to upgrade the general lighting in the space.

  • Install a glass shower enclosure rather than a shower curtain in shower/tub combos.
  • Install frameless glass shower enclosures rather than glass-framed shower enclosures because they allow more light to enter through.
  • Lighter colors can be used to replace dark shower surrounds.
  • Adjust the recessed gimbal lights in the shower area of the main bathroom.
  • Lighten the hue in the bathroom.
  • Replace the clear dome on the ceiling light fixture in the main bathroom area.
  • Or make the existing dome cleaner to allow more light to enter.

Article source:

  • 2020 410.10 (D). National Electrical Code (NEC)
Share This Post: To help others please.

Be the first to comment

Leave a Reply

Your email address will not be published.


*